AVRminiV4.0 Tools and Examples
Written by Pascal Stang | Updated:
Sunday February 20, 2011
Guides:
Tools:
- ft-isp - FTDI ISP Programmer Utility
Allows direct ISP programming of AVR processor via USB connection. No bootloader
needed.
To install and use ftisp:
- Download ftisp for your platform [here]
- Install FTDI USB driver
Get drivers and installation instructions at: www.ftidchip.com
- For Windows systems use the V2.xx.xx (CDM) driver
- For other systems, use the D2XX driver
- AVRminiV4.0 board must be connected to PC via USB.
- Pins 13&15 of USB I/O header must be connected with a shorting block.
- Open a command prompt and run ftisp. Command line syntax will be printed.
Code Examples: **
** Note: Examples require a current version of AVRlib available [here].
Written by Pascal Stang | Updated:
Sunday February 20, 2011